Docs > Redis > Using-redis > Programmability > Redis Lua API reference
Redis includes an embedded Lua 5.1 interpreter. The interpreter runs user-defined ephemeral scripts and functions. Scripts run in a sandboxed context and can only access specific Lua packages. This page describes the packages and APIs available inside the execution's context.
Sandbox context
The sandboxed Lua context attempts to prevent accidental misuse and reduce potential threats from the server's environment.
Scripts should never try to access the Redis server's underlying host systems. That includes the file system, network, and any other attempt to perform a system call other than those supported by the API.
Scripts should operate solely on data stored in Redis and data provided as arguments to their execution.
Global variables and functions
The sandboxed Lua execution context blocks the declaration of global variables and functions. The blocking of global variables is in place to ensure that scripts and functions don't attempt to maintain any runtime context other than the data stored in Redis. In the (somewhat uncommon) use case that a context needs to be maintain between executions, you should store the context in Redis' keyspace.
Redis will return a "Script attempted to create global variable 'my_global_variable" error when trying to execute the following snippet:
my_global_variable = 'some value'
And similarly for the following global function declaration:
function my_global_function()
-- Do something amazing
end
You'll also get a similar error when your script attempts to access any global variables that are undefined in the runtime's context:
-- The following will surely raise an error
return an_undefined_global_variable
Instead, all variable and function definitions are required to be declared as local. To do so, you'll need to prepend the local keyword to your declarations. For example, the following snippet will be considered perfectly valid by Redis:
local my_local_variable = 'some value'
local function my_local_function()
-- Do something else, but equally amazing
end
Note: the sandbox attempts to prevent the use of globals. Using Lua's debugging functionality or other approaches such as altering the meta table used for implementing the globals' protection to circumvent the sandbox isn't hard. However, it is difficult to circumvent the protection by accident. If the user messes with the Lua global state, the consistency of AOF and replication can't be guaranteed. In other words, just don't do it.
Imported Lua modules
Using imported Lua modules is not supported inside the sandboxed execution context.
The sandboxed execution context prevents the loading modules by disabling Lua's require
function.
The only libraries that Redis ships with and that you can use in scripts are listed under the Runtime libraries section.
Runtime globals
While the sandbox prevents users from declaring globals, the execution context is pre-populated with several of these.
The redis singleton
The redis singleton is an object instance that's accessible from all scripts. It provides the API to interact with Redis from scripts. Its description follows below.
The KEYS global variable
- Since version: 2.6.0
- Available in scripts: yes
- Available in functions: no
Important: to ensure the correct execution of scripts, both in standalone and clustered deployments, all names of keys that a function accesses must be explicitly provided as input key arguments. The script should only access keys whose names are given as input arguments. Scripts should never access keys with programmatically-generated names or based on the contents of data structures stored in the database.
The KEYS global variable is available only for ephemeral scripts. It is pre-populated with all key name input arguments.
The ARGV global variable
- Since version: 2.6.0
- Available in scripts: yes
- Available in functions: no
The ARGV global variable is available only in ephemeral scripts. It is pre-populated with all regular input arguments.
redis object
- Since version: 2.6.0
- Available in scripts: yes
- Available in functions: yes
The Redis Lua execution context always provides a singleton instance of an object named redis. The redis instance enables the script to interact with the Redis server that's running it. Following is the API provided by the redis object instance.
redis.call(command [,arg...])
- Since version: 2.6.0
- Available in scripts: yes
- Available in functions: yes
The redis.call()
function calls a given Redis command and returns its reply.
Its inputs are the command and arguments, and once called, it executes the command in Redis and returns the reply.
For example, we can call the ECHO
command from a script and return its reply like so:
return redis.call('ECHO', 'Echo, echo... eco... o...')
If and when redis.call()
triggers a runtime exception, the raw exception is raised back to the user as an error, automatically.
Therefore, attempting to execute the following ephemeral script will fail and generate a runtime exception because ECHO
accepts exactly zero or one argument:
redis> EVAL "return redis.call('ECHO', 'Echo,', 'echo... ', 'eco... ', 'o...')" 0
(error) ERR Error running script (call to b0345693f4b77517a711221050e76d24ae60b7f7): @user_script:1: @user_script: 1: Wrong number of args calling Redis command from script
Note that the call can fail due to various reasons, see Execution under low memory conditions and Script flags
To handle Redis runtime errors use `redis.pcall() instead.
redis.pcall(command [,arg...])
- Since version: 2.6.0
- Available in scripts: yes
- Available in functions: yes
This function enables handling runtime errors raised by the Redis server.
The redis.pcall()
function behaves exactly like redis.call()
, except that it:
- Always returns a reply.
- Never throws a runtime exception, and returns in its stead a
redis.error_reply
in case that a runtime exception is thrown by the server.
The following demonstrates how to use redis.pcall()
to intercept and handle runtime exceptions from within the context of an ephemeral script.
local reply = redis.pcall('ECHO', unpack(ARGV))
if reply['err'] ~= nil then
-- Handle the error sometime, but for now just log it
redis.log(redis.LOG_WARNING, reply['err'])
reply['err'] = 'ERR Something is wrong, but no worries, everything is under control'
end
return reply
Evaluating this script with more than one argument will return:
redis> EVAL "..." 0 hello world
(error) ERR Something is wrong, but no worries, everything is under control
redis.error_reply(x)
- Since version: 2.6.0
- Available in scripts: yes
- Available in functions: yes
This is a helper function that returns an error reply. The helper accepts a single string argument and returns a Lua table with the err field set to that string.
The outcome of the following code is that error1 and error2 are identical for all intents and purposes:
local text = 'ERR My very special error'
local reply1 = { err = text }
local reply2 = redis.error_reply(text)
Therefore, both forms are valid as means for returning an error reply from scripts:
redis> EVAL "return { err = 'ERR My very special table error' }" 0
(error) ERR My very special table error
redis> EVAL "return redis.error_reply('ERR My very special reply error')" 0
(error) ERR My very special reply error
For returning Redis status replies refer to redis.status_reply()
.
Refer to the Data type conversion for returning other response types.
Note:
By convention, Redis uses the first word of an error string as a unique error code for specific errors or ERR
for general-purpose errors.
Scripts are advised to follow this convention, as shown in the example above, but this is not mandatory.
redis.status_reply(x)
- Since version: 2.6.0
- Available in scripts: yes
- Available in functions: yes
This is a helper function that returns a simple string reply. "OK" is an example of a standard Redis status reply. The Lua API represents status replies as tables with a single field, ok, set with a simple status string.
The outcome of the following code is that status1 and status2 are identical for all intents and purposes:
local text = 'Frosty'
local status1 = { ok = text }
local status2 = redis.status_reply(text)
Therefore, both forms are valid as means for returning status replies from scripts:
redis> EVAL "return { ok = 'TICK' }" 0
TICK
redis> EVAL "return redis.status_reply('TOCK')" 0
TOCK
For returning Redis error replies refer to redis.error_reply()
.
Refer to the Data type conversion for returning other response types.
redis.sha1hex(x)
- Since version: 2.6.0
- Available in scripts: yes
- Available in functions: yes
This function returns the SHA1 hexadecimal digest of its single string argument.
You can, for example, obtain the empty string's SHA1 digest:
redis> EVAL "return redis.sha1hex('')" 0
"da39a3ee5e6b4b0d3255bfef95601890afd80709"
redis.log(level, message)
- Since version: 2.6.0
- Available in scripts: yes
- Available in functions: yes
This function writes to the Redis server log.
It expects two input arguments: the log level and a message. The message is a string to write to the log file. Log level can be on of these:
redis.LOG_DEBUG
redis.LOG_VERBOSE
redis.LOG_NOTICE
redis.LOG_WARNING
These levels map to the server's log levels.
The log only records messages equal or greater in level than the server's loglevel
configuration directive.
The following snippet:
redis.log(redis.LOG_WARNING, 'Something is terribly wrong')
will produce a line similar to the following in your server's log:
[32343] 22 Mar 15:21:39 # Something is terribly wrong
redis.setresp(x)
- Since version: 6.0.0
- Available in scripts: yes
- Available in functions: yes
This function allows the executing script to switch between Redis Serialization Protocol (RESP) versions for the replies returned by redis.call()
and redis.pcall()
.
It expects a single numerical argument as the protocol's version.
The default protocol version is 2, but it can be switched to version 3.
Here's an example of switching to RESP3 replies:
redis.setresp(3)
Please refer to the Data type conversion for more information about type conversions.
redis.set_repl(x)
- Since version: 3.2.0
- Available in scripts: yes
- Available in functions: no
Note: this feature is only available when script effects replication is employed. Calling it when using verbatim script replication will result in an error. As of Redis version 2.6.0, scripts were replicated verbatim, meaning that the scripts' source code was sent for execution by replicas and stored in the AOF. An alternative replication mode added in version 3.2.0 allows replicating only the scripts' effects. As of Redis version 7.0, script replication is no longer supported, and the only replication mode available is script effects replication.
Warning: this is an advanced feature. Misuse can cause damage by violating the contract that binds the Redis master, its replicas, and AOF contents to hold the same logical content.
This function allows a script to assert control over how its effects are propagated to replicas and the AOF afterward. A script's effects are the Redis write commands that it calls.
By default, all write commands that a script executes are replicated. Sometimes, however, better control over this behavior can be helpful. This can be the case, for example, when storing intermediate values in the master alone.
Consider a script that intersects two sets and stores the result in a temporary key with SUNIONSTORE
.
It then picks five random elements (SRANDMEMBER
) from the intersection and stores (SADD
) them in another set.
Finally, before returning, it deletes the temporary key that stores the intersection of the two source sets.
In this case, only the new set with its five randomly-chosen elements needs to be replicated.
Replicating the SUNIONSTORE
command and the `DEL'ition of the temporary key is unnecessary and wasteful.
The redis.set_repl()
function instructs the server how to treat subsequent write commands in terms of replication.
It accepts a single input argument that only be one of the following:
redis.REPL_ALL
: replicates the effects to the AOF and replicas.redis.REPL_AOF
: replicates the effects to the AOF alone.redis.REPL_REPLICA
: replicates the effects to the replicas alone.redis.REPL_SLAVE
: same asREPL_REPLICA
, maintained for backward compatibility.redis.REPL_NONE
: disables effect replication entirely.
By default, the scripting engine is initialized to the redis.REPL_ALL
setting when a script begins its execution.
You can call the redis.set_repl()
function at any time during the script's execution to switch between the different replication modes.
A simple example follows:
redis.replicate_commands() -- Enable effects replication in versions lower than Redis v7.0
redis.call('SET', KEYS[1], ARGV[1])
redis.set_repl(redis.REPL_NONE)
redis.call('SET', KEYS[2], ARGV[2])
redis.set_repl(redis.REPL_ALL)
redis.call('SET', KEYS[3], ARGV[3])
If you run this script by calling EVAL "..." 3 A B C 1 2 3
, the result will be that only the keys A and C are created on the replicas and AOF.
redis.replicate_commands()
- Since version: 3.2.0
- Until version: 7.0.0
- Available in scripts: yes
- Available in functions: no
This function switches the script's replication mode from verbatim replication to effects replication. You can use it to override the default verbatim script replication mode used by Redis until version 7.0.
Note:
as of Redis v7.0, verbatim script replication is no longer supported.
The default, and only script replication mode supported, is script effects' replication.
For more information, please refer to Replicating commands instead of scripts
redis.breakpoint()
- Since version: 3.2.0
- Available in scripts: yes
- Available in functions: no
This function triggers a breakpoint when using the Redis Lua debugger](/topics/ldb).
redis.debug(x)
- Since version: 3.2.0
- Available in scripts: yes
- Available in functions: no
This function prints its argument in the Redis Lua debugger console.
redis.acl_check_cmd(command [,arg...])
- Since version: 7.0.0
- Available in scripts: yes
- Available in functions: yes
This function is used for checking if the current user running the script has ACL permissions to execute the given command with the given arguments.
The return value is a boolean true
in case the current user has permissions to execute the command (via a call to redis.call or redis.pcall) or false
in case they don't.
The function will raise an error if the passed command or its arguments are invalid.
redis.register_function
- Since version: 7.0.0
- Available in scripts: no
- Available in functions: yes
This function is only available from the context of the FUNCTION LOAD
command.
When called, it registers a function to the loaded library.
The function can be called either with positional or named arguments.
positional arguments: redis.register_function(name, callback)
The first argument to redis.register_function
is a Lua string representing the function name.
The second argument to redis.register_function
is a Lua function.
Usage example:
redis> FUNCTION LOAD "#!lua name=mylib\n redis.register_function('noop', function() end)"
Named arguments: redis.register_function{function_name=name, callback=callback, flags={flag1, flag2, ..}, description=description}
The named arguments variant accepts the following arguments:
- function_name: the function's name.
- callback: the function's callback.
- flags: an array of strings, each a function flag (optional).
- description: function's description (optional).
Both function_name and callback are mandatory.
Usage example:
redis> FUNCTION LOAD "#!lua name=mylib\n redis.register_function{function_name='noop', callback=function() end, flags={ 'no-writes' }, description='Does nothing'}"
Script flags
Important: Use script flags with care, which may negatively impact if misused. Note that the default for Eval scripts are different than the default for functions that are mentioned below, see Eval Flags
When you register a function or load an Eval script, the server does not know how it accesses the database. By default, Redis assumes that all scripts read and write data. This results in the following behavior:
- They can read and write data.
- They can run in cluster mode, and are not able to run commands accessing keys of different hash slots.
- Execution against a stale replica is denied to avoid inconsistent reads.
- Execution under low memory is denied to avoid exceeding the configured threshold.
You can use the following flags and instruct the server to treat the scripts' execution differently:
-
no-writes
: this flag indicates that the script only reads data but never writes.By default, Redis will deny the execution of flagged scripts (Functions and Eval scripts with shebang) against read-only replicas, as they may attempt to perform writes. Similarly, the server will not allow calling scripts with
FCALL_RO
/EVAL_RO
. Lastly, when data persistence is at risk due to a disk error, execution is blocked as well.Using this flag allows executing the script:
- With
FCALL_RO
/EVAL_RO
- On read-only replicas.
- Even if there's a disk error (Redis is unable to persist so it rejects writes).
- When over the memory limit since it implies the script doesn't increase memory consumption (see
allow-oom
below)
However, note that the server will return an error if the script attempts to call a write command. Also note that currently
PUBLISH
,SPUBLISH
andPFCOUNT
are also considered write commands in scripts, because they could attempt to propagate commands to replicas and AOF file.For more information please refer to Read-only scripts
- With
-
allow-oom
: use this flag to allow a script to execute when the server is out of memory (OOM).Unless used, Redis will deny the execution of flagged scripts (Functions and Eval scripts with shebang) when in an OOM state. Furthermore, when you use this flag, the script can call any Redis command, including commands that aren't usually allowed in this state. Specifying
no-writes
or usingFCALL_RO
/EVAL_RO
also implies the script can run in OOM state (without specifyingallow-oom
) -
allow-stale
: a flag that enables running the flagged scripts (Functions and Eval scripts with shebang) against a stale replica when thereplica-serve-stale-data
config is set tono
.Redis can be set to prevent data consistency problems from using old data by having stale replicas return a runtime error. For scripts that do not access the data, this flag can be set to allow stale Redis replicas to run the script. Note however that the script will still be unable to execute any command that accesses stale data.
-
no-cluster
: the flag causes the script to return an error in Redis cluster mode.Redis allows scripts to be executed both in standalone and cluster modes. Setting this flag prevents executing the script against nodes in the cluster.
-
allow-cross-slot-keys
: The flag that allows a script to access keys from multiple slots.Redis typically prevents any single command from accessing keys that hash to multiple slots. This flag allows scripts to break this rule and access keys within the script that access multiple slots. Declared keys to the script are still always required to hash to a single slot. Accessing keys from multiple slots is discouraged as applications should be designed to only access keys from a single slot at a time, allowing slots to move between Redis servers.
This flag has no effect when cluster mode is disabled.
Please refer to Function Flags and Eval Flags for a detailed example.
redis.REDIS_VERSION
- Since version: 7.0.0
- Available in scripts: yes
- Available in functions: yes
Returns the current Redis server version as a Lua string.
The reply's format is MM.mm.PP
, where:
- MM: is the major version.
- mm: is the minor version.
- PP: is the patch level.
redis.REDIS_VERSION_NUM
- Since version: 7.0.0
- Available in scripts: yes
- Available in functions: yes
Returns the current Redis server version as a number.
The reply is a hexadecimal value structured as 0x00MMmmPP
, where:
- MM: is the major version.
- mm: is the minor version.
- PP: is the patch level.
Data type conversion
Unless a runtime exception is raised, redis.call()
and redis.pcall()
return the reply from the executed command to the Lua script.
Redis' replies from these functions are converted automatically into Lua's native data types.
Similarly, when a Lua script returns a reply with the return
keyword,
that reply is automatically converted to Redis' protocol.
Put differently; there's a one-to-one mapping between Redis' replies and Lua's data types and a one-to-one mapping between Lua's data types and the Redis Protocol data types. The underlying design is such that if a Redis type is converted into a Lua type and converted back into a Redis type, the result is the same as the initial value.
Type conversion from Redis protocol replies (i.e., the replies from redis.call()
and redis.pcall()
to Lua data types depends on the Redis Serialization Protocol version used by the script.
The default protocol version during script executions is RESP2.
The script may switch the replies' protocol versions by calling the redis.setresp()
function.
Type conversion from a script's returned Lua data type depends on the user's choice of protocol (see the HELLO
command).
The following sections describe the type conversion rules between Lua and Redis per the protocol's version.
RESP2 to Lua type conversion
The following type conversion rules apply to the execution's context by default as well as after calling redis.setresp(2)
:
- RESP2 integer reply -> Lua number
- RESP2 bulk string reply -> Lua string
- RESP2 array reply -> Lua table (may have other Redis data types nested)
- RESP2 status reply -> Lua table with a single ok field containing the status string
- RESP2 error reply -> Lua table with a single err field containing the error string
- RESP2 null bulk reply and null multi bulk reply -> Lua false boolean type
Lua to RESP2 type conversion
The following type conversion rules apply by default as well as after the user had called HELLO 2
:
- Lua number -> RESP2 integer reply (the number is converted into an integer)
- Lua string -> RESP bulk string reply
- Lua table (indexed, non-associative array) -> RESP2 array reply (truncated at the first Lua
nil
value encountered in the table, if any) - Lua table with a single ok field -> RESP2 status reply
- Lua table with a single err field -> RESP2 error reply
- Lua boolean false -> RESP2 null bulk reply
There is an additional Lua-to-Redis conversion rule that has no corresponding Redis-to-Lua conversion rule:
- Lua Boolean
true
-> RESP2 integer reply with value of 1.
There are three additional rules to note about converting Lua to Redis data types:
- Lua has a single numerical type, Lua numbers.
There is no distinction between integers and floats.
So we always convert Lua numbers into integer replies, removing the decimal part of the number, if any.
If you want to return a Lua float, it should be returned as a string,
exactly like Redis itself does (see, for instance, the
ZSCORE
command). - There's no simple way to have nils inside Lua arrays due
to Lua's table semantics.
Therefore, when Redis converts a Lua array to RESP, the conversion stops when it encounters a Lua
nil
value. - When a Lua table is an associative array that contains keys and their respective values, the converted Redis reply will not include them.
Lua to RESP2 type conversion examples:
redis> EVAL "return 10" 0
(integer) 10
redis> EVAL "return { 1, 2, { 3, 'Hello World!' } }" 0
1) (integer) 1
2) (integer) 2
3) 1) (integer) 3
1) "Hello World!"
redis> EVAL "return redis.call('get','foo')" 0
"bar"
The last example demonstrates receiving and returning the exact return value of redis.call()
(or redis.pcall()
) in Lua as it would be returned if the command had been called directly.
The following example shows how floats and arrays that cont nils and keys are handled:
redis> EVAL "return { 1, 2, 3.3333, somekey = 'somevalue', 'foo', nil , 'bar' }" 0
1) (integer) 1
2) (integer) 2
3) (integer) 3
4) "foo"
As you can see, the float value of 3.333 gets converted to an integer 3, the somekey key and its value are omitted, and the string "bar" isn't returned as there is a nil
value that precedes it.
RESP3 to Lua type conversion
RESP3 is a newer version of the Redis Serialization Protocol. It is available as an opt-in choice as of Redis v6.0.
An executing script may call the redis.setresp
function during its execution and switch the protocol version that's used for returning replies from Redis' commands (that can be invoked via redis.call()
or redis.pcall()
).
Once Redis' replies are in RESP3 protocol, all of the RESP2 to Lua conversion rules apply, with the following additions:
- RESP3 map reply -> Lua table with a single map field containing a Lua table representing the fields and values of the map.
- RESP set reply -> Lua table with a single set field containing a Lua table representing the elements of the set as fields, each with the Lua Boolean value of
true
. - RESP3 null -> Lua
nil
. - RESP3 true reply -> Lua true boolean value.
- RESP3 false reply -> Lua false boolean value.
- RESP3 double reply -> Lua table with a single double field containing a Lua number representing the double value.
- RESP3 big number reply -> Lua table with a single _bignumber field containing a Lua string representing the big number value.
- Redis verbatim string reply -> Lua table with a single _verbatimstring field containing a Lua table with two fields, string and format, representing the verbatim string and its format, respectively.
Note: the RESP3 big number and verbatim strings replies are only supported as of Redis v7.0 and greater. Also, presently, RESP3's attributes, streamed strings and streamed aggregate data types are not supported by the Redis Lua API.
Lua to RESP3 type conversion
Regardless of the script's choice of protocol version set for replies with the [redis.setresp()
function] when it calls redis.call()
or redis.pcall()
, the user may opt-in to using RESP3 (with the HELLO 3
command) for the connection.
Although the default protocol for incoming client connections is RESP2, the script should honor the user's preference and return adequately-typed RESP3 replies, so the following rules apply on top of those specified in the Lua to RESP2 type conversion section when that is the case.
- Lua Boolean -> RESP3 Boolean reply (note that this is a change compared to the RESP2, in which returning a Boolean Lua
true
returned the number 1 to the Redis client, and returning afalse
used to return anull
. - Lua table with a single map field set to an associative Lua table -> RESP3 map reply.
- Lua table with a single set field set to an associative Lua table -> RESP3 set reply. Values can be set to anything and are discarded anyway.
- Lua table with a single double field to an associative Lua table -> RESP3 double reply.
- Lua nil -> RESP3 null.
However, if the connection is set use the RESP2 protocol, and even if the script replies with RESP3-typed responses, Redis will automatically perform a RESP3 to RESP2 conversion of the reply as is the case for regular commands. That means, for example, that returning the RESP3 map type to a RESP2 connection will result in the repy being converted to a flat RESP2 array that consists of alternating field names and their values, rather than a RESP3 map.
Additional notes about scripting
Using SELECT
inside scripts
You can call the SELECT
command from your Lua scripts, like you can with any normal client connection.
However, one subtle aspect of the behavior changed between Redis versions 2.8.11 and 2.8.12.
Prior to Redis version 2.8.12, the database selected by the Lua script was set as the current database for the client connection that had called it.
As of Redis version 2.8.12, the database selected by the Lua script only affects the execution context of the script, and does not modify the database that's selected by the client calling the script.
This semantic change between patch level releases was required since the old behavior was inherently incompatible with Redis' replication and introduced bugs.
Runtime libraries
The Redis Lua runtime context always comes with several pre-imported libraries.
The following standard Lua libraries are available to use:
- The String Manipulation (string) library
- The Table Manipulation (table) library
- The Mathematical Functions (math) library
In addition, the following external libraries are loaded and accessible to scripts:
- The struct library
- The cjson library
- The cmsgpack library
- The bitop library
struct library
- Since version: 2.6.0
- Available in scripts: yes
- Available in functions: yes
struct is a library for packing and unpacking C-like structures in Lua. It provides the following functions:
All of struct's functions expect their first argument to be a format string.
struct formats
The following are valid format strings for struct's functions:
>
: big endian<
: little endian![num]
: alignmentx
: paddingb/B
: signed/unsigned byteh/H
: signed/unsigned shortl/L
: signed/unsigned longT
: size_ti/In
: signed/unsigned integer with size n (defaults to the size of int)cn
: sequence of n chars (from/to a string); when packing, n == 0 means the whole string; when unpacking, n == 0 means use the previously read number as the string's length.s
: zero-terminated stringf
: floatd
: double
struct.pack(x)
This function returns a struct-encoded string from values. It accepts a struct format string as its first argument, followed by the values that are to be encoded.
Usage example:
redis> EVAL "return struct.pack('HH', 1, 2)" 0
"\x01\x00\x02\x00"
struct.unpack(x)
This function returns the decoded values from a struct. It accepts a struct format string as its first argument, followed by encoded struct's string.
Usage example:
redis> EVAL "return { struct.unpack('HH', ARGV[1]) }" 0 "\x01\x00\x02\x00"
1) (integer) 1
2) (integer) 2
3) (integer) 5
struct.size(x)
This function returns the size, in bytes, of a struct. It accepts a struct format string as its only argument.
Usage example:
redis> EVAL "return struct.size('HH')" 0
(integer) 4
cjson library
- Since version: 2.6.0
- Available in scripts: yes
- Available in functions: yes
The cjson library provides fast JSON encoding and decoding from Lua. It provides these functions.
cjson.encode(x)
This function returns a JSON-encoded string for the Lua data type provided as its argument.
Usage example:
redis> EVAL "return cjson.encode({ ['foo'] = 'bar' })" 0
"{\"foo\":\"bar\"}"
cjson.decode(x)
This function returns a Lua data type from the JSON-encoded string provided as its argument.
Usage example:
redis> EVAL "return cjson.decode(ARGV[1])['foo']" 0 '{"foo":"bar"}'
"bar"
cmsgpack library
- Since version: 2.6.0
- Available in scripts: yes
- Available in functions: yes
The cmsgpack library provides fast MessagePack encoding and decoding from Lua. It provides these functions.
cmsgpack.pack(x)
This function returns the packed string encoding of the Lua data type it is given as an argument.
Usage example:
redis> EVAL "return cmsgpack.pack({'foo', 'bar', 'baz'})" 0
"\x93\xa3foo\xa3bar\xa3baz"
cmsgpack.unpack(x)
This function returns the unpacked values from decoding its input string argument.
Usage example:
redis> EVAL "return cmsgpack.unpack(ARGV[1])" 0 "\x93\xa3foo\xa3bar\xa3baz"
1) "foo"
2) "bar"
3) "baz"
bit library
- Since version: 2.8.18
- Available in scripts: yes
- Available in functions: yes
The bit library provides bitwise operations on numbers. Its documentation resides at Lua BitOp documentation It provides the following functions.
bit.tobit(x)
Normalizes a number to the numeric range for bit operations and returns it.
Usage example:
redis> EVAL 'return bit.tobit(1)' 0
(integer) 1
bit.tohex(x [,n])
Converts its first argument to a hex string. The number of hex digits is given by the absolute value of the optional second argument.
Usage example:
redis> EVAL 'return bit.tohex(422342)' 0
"000671c6"
bit.bnot(x)
Returns the bitwise not of its argument.
bit.bnot(x)
bit.bor(x1 [,x2...])
, bit.band(x1 [,x2...])
and bit.bxor(x1 [,x2...])
Returns either the bitwise or, bitwise and, or bitwise xor of all of its arguments. Note that more than two arguments are allowed.
Usage example:
redis> EVAL 'return bit.bor(1,2,4,8,16,32,64,128)' 0
(integer) 255
bit.lshift(x, n)
, bit.rshift(x, n)
and bit.arshift(x, n)
Returns either the bitwise logical left-shift, bitwise logical right-shift, or bitwise arithmetic right-shift of its first argument by the number of bits given by the second argument.
bit.rol(x, n)
and bit.ror(x, n)
Returns either the bitwise left rotation, or bitwise right rotation of its first argument by the number of bits given by the second argument. Bits shifted out on one side are shifted back in on the other side.
bit.bswap(x)
Swaps the bytes of its argument and returns it. This can be used to convert little-endian 32-bit numbers to big-endian 32-bit numbers and vice versa.